440 lines
20 KiB
R
440 lines
20 KiB
R
cat("Retrieving Input Parameters\n")
|
|
inputFile<-'tacsat.csv'
|
|
outputFile<-'tacsat_interpolated.csv'
|
|
|
|
require(data.table)
|
|
print(Sys.time())
|
|
|
|
memory.size(max = TRUE)
|
|
memory.limit(size = 4000)
|
|
|
|
interCubicHermiteSpline <- function(spltx,spltCon,res,params,headingAdjustment){
|
|
|
|
#Formula of Cubic Hermite Spline
|
|
t <- seq(0,1,length.out=res)
|
|
F00 <- 2*t^3 -3*t^2 + 1
|
|
F10 <- t^3-2*t^2+t
|
|
F01 <- -2*t^3+3*t^2
|
|
F11 <- t^3-t^2
|
|
|
|
#Making tacsat dataset ready
|
|
spltx[spltCon[,1],"SI_HE"][which(is.na(spltx[spltCon[,1],"SI_HE"]))] <- 0
|
|
spltx[spltCon[,2],"SI_HE"][which(is.na(spltx[spltCon[,2],"SI_HE"]))] <- 0
|
|
|
|
#Heading at begin point in degrees
|
|
Hx0 <- sin(spltx[spltCon[,1],"SI_HE"]/(180/pi))
|
|
Hy0 <- cos(spltx[spltCon[,1],"SI_HE"]/(180/pi))
|
|
|
|
#Heading at end point in degrees
|
|
Hx1 <- sin(spltx[spltCon[,2]-headingAdjustment,"SI_HE"]/(180/pi))
|
|
Hy1 <- cos(spltx[spltCon[,2]-headingAdjustment,"SI_HE"]/(180/pi))
|
|
|
|
#Start and end positions
|
|
Mx0 <- spltx[spltCon[,1],"SI_LONG"]
|
|
Mx1 <- spltx[spltCon[,2],"SI_LONG"]
|
|
My0 <- spltx[spltCon[,1],"SI_LATI"]
|
|
My1 <- spltx[spltCon[,2],"SI_LATI"]
|
|
|
|
#Corrected for longitude lattitude effect
|
|
Hx0 <- Hx0 * params$fm * spltx[spltCon[,1],"SI_SP"] /((params$st[2]-params$st[1])/2+params$st[1])
|
|
Hx1 <- Hx1 * params$fm * spltx[spltCon[,2],"SI_SP"] /((params$st[2]-params$st[1])/2+params$st[1])
|
|
Hy0 <- Hy0 * params$fm * lonLatRatio(spltx[spltCon[,1],"SI_LONG"],spltx[spltCon[,1],"SI_LATI"]) * spltx[spltCon[,1],"SI_SP"]/((params$st[2]-params$st[1])/2+params$st[1])
|
|
Hy1 <- Hy1 * params$fm * lonLatRatio(spltx[spltCon[,2],"SI_LONG"],spltx[spltCon[,2],"SI_LATI"]) * spltx[spltCon[,2],"SI_SP"]/((params$st[2]-params$st[1])/2+params$st[1])
|
|
|
|
#Get the interpolation
|
|
fx <- outer(F00,Mx0,"*")+outer(F10,Hx0,"*")+outer(F01,Mx1,"*")+outer(F11,Hx1,"*")
|
|
fy <- outer(F00,My0,"*")+outer(F10,Hy0,"*")+outer(F01,My1,"*")+outer(F11,Hy1,"*")
|
|
|
|
#Create output format
|
|
intsx <- lapply(as.list(1:nrow(spltCon)),function(x){
|
|
matrix(rbind(spltx$ID[spltCon[x,]],cbind(fx[,x],fy[,x])),ncol=2,
|
|
dimnames=list(c("startendVMS",seq(1,res,1)),c("x","y")))})
|
|
return(intsx)}
|
|
|
|
rbindTacsat <- function(set1,set2){
|
|
cln1 <- colnames(set1)
|
|
cln2 <- colnames(set2)
|
|
if(any(duplicated(cln1)==TRUE) || any(duplicated(cln2)==TRUE)) stop("Duplicate column names in datasets")
|
|
idx1 <- which(is.na(pmatch(cln1,cln2))==TRUE)
|
|
idx2 <- which(is.na(pmatch(cln2,cln1))==TRUE)
|
|
|
|
if(length(idx1)>0){
|
|
for(i in idx1) set2 <- cbind(set2,NA)
|
|
colnames(set2) <- c(cln2,cln1[idx1])}
|
|
if(length(idx2)>0){
|
|
for(i in idx2) set1 <- cbind(set1,NA)
|
|
colnames(set1) <- c(cln1,cln2[idx2])}
|
|
cln1 <- colnames(set1)
|
|
cln2 <- colnames(set2)
|
|
mtch <- pmatch(cln1,cln2)
|
|
if(any(is.na(mtch))==TRUE) stop("Cannot find nor create all matching column names")
|
|
set3 <- rbind(set1,set2[,cln2[mtch]])
|
|
return(set3)}
|
|
|
|
bearing <- function(lon,lat,lonRef,latRef){
|
|
|
|
x1 <- lon
|
|
y1 <- lat
|
|
x2 <- lonRef
|
|
y2 <- latRef
|
|
|
|
y <- sin((x2-x1)*pi/180) * cos(y2*pi/180)
|
|
x <- cos(y1*pi/180) * sin(y2*pi/180) - sin(y1*pi/180) * cos(y2*pi/180) * cos((x2-x1)*pi/180)
|
|
bearing <- atan2(y,x)*180/pi
|
|
bearing <- (bearing + 360)%%360
|
|
return(bearing)}
|
|
|
|
`distance` <-
|
|
function(lon,lat,lonRef,latRef){
|
|
|
|
pd <- pi/180
|
|
|
|
a1<- sin(((latRef-lat)*pd)/2)
|
|
a2<- cos(lat*pd)
|
|
a3<- cos(latRef*pd)
|
|
a4<- sin(((lonRef-lon)*pd)/2)
|
|
a <- a1*a1+a2*a3*a4*a4
|
|
|
|
c <- 2*atan2(sqrt(a),sqrt(1-a));
|
|
return(6371*c)}
|
|
|
|
distanceInterpolation <- function(interpolation){
|
|
|
|
res <- unlist(lapply(interpolation,function(x){
|
|
dims <- dim(x)
|
|
res <- distance(x[3:dims[1],1],x[3:dims[1],2],x[2:(dims[1]-1),1],x[2:(dims[1]-1),2])
|
|
return(sum(res,na.rm=TRUE))}))
|
|
|
|
return(res)}
|
|
|
|
|
|
equalDistance <- function(interpolation,res=10){
|
|
|
|
#Calculate ditance of all interpolations at the same time
|
|
totDist <- distanceInterpolation(interpolation)
|
|
#Get dimensions of interpolations
|
|
lngInt <- lapply(interpolation,dim)
|
|
|
|
#Warn if resolution of equal distance is too high compared to original resolution of interpolation
|
|
if(min(unlist(lngInt)[seq(1,length(totDist),2)],na.rm=TRUE) < 9*res) warnings("Number of intermediate points in the interpolation might be too small for the equal distance pionts chosen")
|
|
|
|
#Get distance steps to get equal distance
|
|
eqStep <- totDist/(res-1)
|
|
|
|
#Get x-y values of all interpolations
|
|
intidx <- matrix(unlist(lapply(interpolation,function(x){return(x[1,])})),ncol=2,byrow=TRUE)
|
|
|
|
#Do the calculation
|
|
result <- lapply(interpolation,function(ind){
|
|
i <- which(intidx[,1] == ind[1,1] & intidx[,2] == ind[1,2])
|
|
idx <- apply(abs(outer(
|
|
cumsum(distance(ind[3:lngInt[[i]][1],1],ind[3:lngInt[[i]][1],2],ind[2:(lngInt[[i]][1]-1),1],ind[2:(lngInt[[i]][1]-1),2])),
|
|
seq(eqStep[i],totDist[i],eqStep[i]),
|
|
"-")),
|
|
2,which.min)+1
|
|
idx <- c(1,idx)
|
|
return(ind[c(1,idx+1),])})
|
|
#Return the equal distance interpolated set in the same format as the interpolated dataset (as a list)
|
|
return(result)}
|
|
|
|
interStraightLine <- function(spltx,spltCon,res){
|
|
|
|
fx <- mapply(seq,spltx[spltCon[,1],"SI_LONG"],spltx[spltCon[,2],"SI_LONG"],length.out=res)
|
|
fy <- mapply(seq,spltx[spltCon[,1],"SI_LATI"],spltx[spltCon[,2],"SI_LATI"],length.out=res)
|
|
|
|
#Create output format
|
|
intsx <- lapply(as.list(1:nrow(spltCon)),function(x){
|
|
matrix(rbind(spltx$ID[spltCon[x,]],cbind(fx[,x],fy[,x])),ncol=2,
|
|
dimnames=list(c("startendVMS",seq(1,res,1)),c("x","y")))})
|
|
return(intsx)}
|
|
|
|
interpolation2Tacsat <- function(interpolation,tacsat,npoints=10,equalDist=TRUE){
|
|
|
|
# This function takes the list of tracks output by interpolateTacsat and converts them back to tacsat format.
|
|
# The npoints argument is the optional number of points between each 'real' position.
|
|
tacsat <- sortTacsat(tacsat)
|
|
if(!"HL_ID" %in% colnames(tacsat)) tacsat$HL_ID <- 1:nrow(tacsat)
|
|
if(!"SI_DATIM" %in% colnames(tacsat)) tacsat$SI_DATIM <- as.POSIXct(paste(tacsat$SI_DATE, tacsat$SI_TIME, sep=" "), tz="GMT", format="%d/%m/%Y %H:%M")
|
|
if(equalDist){
|
|
interpolationEQ <- equalDistance(interpolation,npoints) #Divide points equally along interpolated track (default is 10).
|
|
} else {
|
|
interpolationEQ <- lapply(interpolation,function(x){idx <- round(seq(2,nrow(x),length.out=npoints)); return(x[c(1,idx),])})
|
|
}
|
|
res <- lapply(interpolationEQ,function(x){
|
|
idx <- unlist(x[1,1:2]@.Data); x <- data.frame(x)
|
|
colnames(x) <- c("SI_LONG","SI_LATI")
|
|
cls <- which(apply(tacsat[c(idx),],2,function(y){return(length(unique(y)))})==1)
|
|
for(i in cls){
|
|
x <- cbind(x,rep(tacsat[idx[1],i],nrow(x)));
|
|
colnames(x) <- c(colnames(x)[1:(ncol(x)-1)],colnames(tacsat)[i])
|
|
}
|
|
if(!"VE_COU" %in% colnames(x)) x$VE_COU <- rep(tacsat$VE_COU[idx[1]],nrow(x))
|
|
if(!"VE_REF" %in% colnames(x)) x$VE_REF <- rep(tacsat$VE_REF[idx[1]],nrow(x))
|
|
if(!"FT_REF" %in% colnames(x)) x$FT_REF <- rep(tacsat$FT_REF[idx[1]],nrow(x))
|
|
x$SI_DATIM <- tacsat$SI_DATIM[idx[1]]
|
|
x$SI_DATIM[-c(1:2)] <- as.POSIXct(cumsum(rep(difftime(tacsat$SI_DATIM[idx[2]],tacsat$SI_DATIM[idx[1]],units="secs")/(nrow(x)-2),nrow(x)-2))+tacsat$SI_DATIM[idx[1]],tz="GMT",format = "%d/%m/%Y %H:%M")
|
|
x$SI_DATE <- format(x$SI_DATIM,format="%d/%m/%Y")
|
|
timeNotation <- ifelse(length(unlist(strsplit(tacsat$SI_TIME[1],":")))>2,"secs","mins")
|
|
if(timeNotation == "secs") x$SI_TIME <- format(x$SI_DATIM,format="%H:%M:%S")
|
|
if(timeNotation == "mins") x$SI_TIME <- format(x$SI_DATIM,format="%H:%M")
|
|
x$SI_SP <- mean(c(tacsat$SI_SP[idx[1]],tacsat$SI_SP[idx[2]]),na.rm=TRUE)
|
|
x$SI_HE <- NA;
|
|
x$SI_HE[-c(1,nrow(x))] <- bearing(x$SI_LONG[2:(nrow(x)-1)],x$SI_LATI[2:(nrow(x)-1)],x$SI_LONG[3:nrow(x)],x$SI_LATI[3:nrow(x)])
|
|
x$HL_ID <- tacsat$HL_ID[idx[1]]
|
|
return(x[-c(1,2,nrow(x)),])})
|
|
|
|
#interpolationTot <- do.call(rbind,res)
|
|
interpolationTot <- res[[1]][,which(duplicated(colnames(res[[1]]))==FALSE)]
|
|
if(length(res)>1){
|
|
for(i in 2:length(res)){
|
|
if(nrow(res[[i]])>0)
|
|
interpolationTot <- rbindTacsat(interpolationTot,res[[i]][,which(duplicated(colnames(res[[i]]))==FALSE)])
|
|
}
|
|
}
|
|
#tacsatInt <- rbind(interpolationTot,tacsat[,colnames(interpolationTot)])
|
|
tacsatInt <- rbindTacsat(tacsat,interpolationTot)
|
|
tacsatInt <- sortTacsat(tacsatInt)
|
|
|
|
return(tacsatInt)
|
|
|
|
}
|
|
|
|
`sortTacsat` <-
|
|
function(dat){
|
|
require(doBy)
|
|
|
|
if(!"SI_DATIM" %in% colnames(dat)) dat$SI_DATIM <- as.POSIXct(paste(dat$SI_DATE, dat$SI_TIME, sep=" "), tz="GMT", format="%d/%m/%Y %H:%M")
|
|
|
|
#Sort the tacsat data first by ship, then by date
|
|
if("VE_REF" %in% colnames(dat)) dat <- orderBy(~VE_REF+SI_DATIM,data=dat)
|
|
if("OB_REF" %in% colnames(dat)) dat <- orderBy(~OB_REF+SI_DATIM,data=dat)
|
|
|
|
return(dat)}
|
|
|
|
`lonLatRatio` <-
|
|
function(x1,lat){
|
|
#Based on the Haversine formula
|
|
#At the position, the y-position remains the same, hence, cos(lat)*cos(lat) instead of cos(lat) * cos(y2)
|
|
a <- cos(lat*pi/180)*cos(lat*pi/180)*sin((0.1*pi/180)/2)*sin((0.1*pi/180)/2);
|
|
c <- 2*atan2(sqrt(a),sqrt(1-a));
|
|
R <- 6371;
|
|
dx1 <- R*c
|
|
|
|
return(c(dx1/11.12))}
|
|
|
|
|
|
`an` <-
|
|
function(x){return(as.numeric(x))}
|
|
|
|
|
|
`findEndTacsat` <-
|
|
function(tacsat
|
|
,startTacsat #Starting point of VMS
|
|
,interval #Specify in minutes, NULL means use all points
|
|
,margin #Specify the margin in minutes it might deviate from the interval time, in minutes
|
|
){
|
|
VMS <- tacsat
|
|
if(!"SI_DATIM" %in% colnames(VMS)) VMS$SI_DATIM <- as.POSIXct(paste(tacsat$SI_DATE, tacsat$SI_TIME, sep=" "), tz="GMT", format="%d/%m/%Y %H:%M")
|
|
|
|
startVMS <- startTacsat
|
|
clStartVMS <- startVMS #Total VMS list starting point instead of subset use
|
|
iShip <- VMS$VE_REF[startVMS]
|
|
VMS. <- subset(VMS,VE_REF==iShip)
|
|
startVMS <- which(VMS$VE_REF[startVMS] == VMS.$VE_REF & VMS$SI_DATIM[startVMS] == VMS.$SI_DATIM)
|
|
if(clStartVMS != dim(VMS)[1]){
|
|
if(VMS$VE_REF[clStartVMS] != VMS$VE_REF[clStartVMS+1]){
|
|
#End of dataset reached
|
|
endDataSet <- 1
|
|
endVMS <- NA
|
|
} else {
|
|
#Calculate the difference in time between the starting VMS point and its succeeding points
|
|
diffTime <- difftime(VMS.$SI_DATIM[(startVMS+1):dim(VMS.)[1]],VMS.$SI_DATIM[startVMS],units=c("mins"))
|
|
if(length(which(diffTime >= (interval-margin) & diffTime <= (interval+margin)))==0){
|
|
warning("No succeeding point found, no interpolation possible")
|
|
endVMS <- NA
|
|
#Check if end of dataset has been reached
|
|
ifelse(all((diffTime < (interval-margin))==TRUE),endDataSet <- 1,endDataSet <- 0)
|
|
} else {
|
|
res <- which(diffTime >= (interval-margin) & diffTime <= (interval+margin))
|
|
if(length(res)>1){
|
|
res2 <- which.min(abs(interval-an(diffTime[res])))
|
|
endVMS <- startVMS + res[res2]
|
|
endDataSet <- 0
|
|
} else {
|
|
endVMS <- startVMS + res
|
|
endDataSet <- 0
|
|
}
|
|
}
|
|
#Build-in check
|
|
if(is.na(endVMS)==FALSE){
|
|
if(!an(difftime(VMS.$SI_DATIM[endVMS],VMS.$SI_DATIM[startVMS],units=c("mins"))) %in% seq((interval-margin),(interval+margin),1)) stop("found endVMS point not within interval range")
|
|
endVMS <- clStartVMS + (endVMS - startVMS)
|
|
}
|
|
|
|
}
|
|
} else { endDataSet <- 1; endVMS <- NA}
|
|
|
|
return(c(endVMS,endDataSet))}
|
|
|
|
`interpolateTacsat` <-
|
|
function(tacsat #VMS datapoints
|
|
,interval=120 #Specify in minutes, NULL means use all points
|
|
,margin=12 #Specify the margin in minutes that the interval might deviate in a search for the next point
|
|
,res=100 #Resolution of interpolation method (default = 100)
|
|
,method="cHs" #Specify the method to be used: Straight line (SL) of cubic Hermite spline (cHs)
|
|
,params=list(fm=0.5,distscale=20,sigline=0.2,st=c(2,6)) #Specify the three parameters: fm, distscale, sigline, speedthreshold
|
|
,headingAdjustment=0
|
|
,fast=FALSE){
|
|
|
|
if(!"SI_DATIM" %in% colnames(tacsat)) tacsat$SI_DATIM <- as.POSIXct(paste(tacsat$SI_DATE, tacsat$SI_TIME, sep=" "), tz="GMT", format="%d/%m/%Y %H:%M")
|
|
|
|
#Start interpolating the data
|
|
if(!method %in% c("cHs","SL")) stop("method selected that does not exist")
|
|
|
|
#-------------------------------------------------------------------------------
|
|
#Fast method or not
|
|
#-------------------------------------------------------------------------------
|
|
if(fast){
|
|
#Interpolation only by vessel, so split tacsat up
|
|
tacsat$ID <- 1:nrow(tacsat)
|
|
splitTa <- split(tacsat,tacsat$VE_REF)
|
|
spltTaCon <- lapply(splitTa,function(spltx){
|
|
#Calculate time different between every record
|
|
dftimex <- outer(spltx$SI_DATIM,spltx$SI_DATIM,difftime,units="mins")
|
|
iStep <- 1
|
|
connect <- list()
|
|
counter <- 1
|
|
#Loop over all possible combinations and store if a connection can be made
|
|
while(iStep <= nrow(spltx)){
|
|
endp <- which(dftimex[,iStep] >= (interval - margin) & dftimex[,iStep] <= (interval + margin))
|
|
if(length(endp)>0){
|
|
if(length(endp)>1) endp <- endp[which.min(abs(interval - dftimex[endp,iStep]))][1]
|
|
connect[[counter]] <- c(iStep,endp)
|
|
counter <- counter + 1
|
|
iStep <- endp
|
|
} else { iStep <- iStep + 1}
|
|
}
|
|
#Return matrix of conenctions
|
|
return(do.call(rbind,connect))})
|
|
|
|
if(method=="cHs") returnInterpolations <- unlist(lapply(as.list(names(unlist(lapply(spltTaCon,nrow)))),function(y){
|
|
return(interCubicHermiteSpline(spltx=splitTa[[y]],spltCon=spltTaCon[[y]],res,params,headingAdjustment))}),recursive=FALSE)
|
|
if(method=="SL") returnInterpolations <- unlist(lapply(as.list(names(unlist(lapply(spltTaCon,nrow)))),function(y){
|
|
return(interStraightLine(splitTa[[y]],spltTaCon[[y]],res))}),recursive=FALSE)
|
|
|
|
} else {
|
|
|
|
|
|
#Initiate returning result object
|
|
returnInterpolations <- list()
|
|
|
|
#Start iterating over succeeding points
|
|
for(iStep in 1:(dim(tacsat)[1]-1)){
|
|
if(iStep == 1){
|
|
iSuccess <- 0
|
|
endDataSet <- 0
|
|
startVMS <- 1
|
|
ship <- tacsat$VE_REF[startVMS]
|
|
} else {
|
|
if(is.na(endVMS)==TRUE) endVMS <- startVMS + 1
|
|
startVMS <- endVMS
|
|
#-Check if the end of the dataset is reached
|
|
if(endDataSet == 1 & rev(unique(tacsat$VE_REF))[1] != ship){
|
|
startVMS <- which(tacsat$VE_REF == unique(tacsat$VE_REF)[which(unique(tacsat$VE_REF)==ship)+1])[1]
|
|
ship <- tacsat$VE_REF[startVMS]
|
|
endDataSet<- 0
|
|
}
|
|
if(endDataSet == 1 & rev(unique(tacsat$VE_REF))[1] == ship) endDataSet <- 2 #Final end of dataset
|
|
}
|
|
|
|
#if end of dataset is not reached, try to find succeeding point
|
|
if(endDataSet != 2){
|
|
result <- findEndTacsat(tacsat,startVMS,interval,margin)
|
|
endVMS <- result[1]
|
|
endDataSet <- result[2]
|
|
if(is.na(endVMS)==TRUE) int <- 0 #No interpolation possible
|
|
if(is.na(endVMS)==FALSE) int <- 1 #Interpolation possible
|
|
|
|
#Interpolate according to the Cubic Hermite Spline method
|
|
if(method == "cHs" & int == 1){
|
|
|
|
#Define the cHs formula
|
|
F00 <- numeric()
|
|
F10 <- numeric()
|
|
F01 <- numeric()
|
|
F11 <- numeric()
|
|
i <- 0
|
|
t <- seq(0,1,length.out=res)
|
|
F00 <- 2*t^3 -3*t^2 + 1
|
|
F10 <- t^3-2*t^2+t
|
|
F01 <- -2*t^3+3*t^2
|
|
F11 <- t^3-t^2
|
|
|
|
if (is.na(tacsat[startVMS,"SI_HE"])=="TRUE") tacsat[startVMS,"SI_HE"] <- 0
|
|
if (is.na(tacsat[endVMS, "SI_HE"])=="TRUE") tacsat[endVMS, "SI_HE"] <- 0
|
|
|
|
#Heading at begin point in degrees
|
|
Hx0 <- sin(tacsat[startVMS,"SI_HE"]/(180/pi))
|
|
Hy0 <- cos(tacsat[startVMS,"SI_HE"]/(180/pi))
|
|
#Heading at end point in degrees
|
|
Hx1 <- sin(tacsat[endVMS-headingAdjustment,"SI_HE"]/(180/pi))
|
|
Hy1 <- cos(tacsat[endVMS-headingAdjustment,"SI_HE"]/(180/pi))
|
|
|
|
Mx0 <- tacsat[startVMS, "SI_LONG"]
|
|
Mx1 <- tacsat[endVMS, "SI_LONG"]
|
|
My0 <- tacsat[startVMS, "SI_LATI"]
|
|
My1 <- tacsat[endVMS, "SI_LATI"]
|
|
|
|
#Corrected for longitude lattitude effect
|
|
Hx0 <- Hx0 * params$fm * tacsat[startVMS,"SI_SP"] /((params$st[2]-params$st[1])/2+params$st[1])
|
|
Hx1 <- Hx1 * params$fm * tacsat[endVMS,"SI_SP"] /((params$st[2]-params$st[1])/2+params$st[1])
|
|
Hy0 <- Hy0 * params$fm * lonLatRatio(tacsat[c(startVMS,endVMS),"SI_LONG"],tacsat[c(startVMS,endVMS),"SI_LATI"])[1] * tacsat[startVMS,"SI_SP"]/((params$st[2]-params$st[1])/2+params$st[1])
|
|
Hy1 <- Hy1 * params$fm * lonLatRatio(tacsat[c(startVMS,endVMS),"SI_LONG"],tacsat[c(startVMS,endVMS),"SI_LATI"])[2] * tacsat[endVMS,"SI_SP"]/((params$st[2]-params$st[1]) /2+params$st[1])
|
|
|
|
#Finalizing the interpolation based on cHs
|
|
fx <- numeric()
|
|
fy <- numeric()
|
|
fx <- F00*Mx0+F10*Hx0+F01*Mx1+F11*Hx1
|
|
fy <- F00*My0+F10*Hy0+F01*My1+F11*Hy1
|
|
|
|
#Add one to list of successful interpolations
|
|
iSuccess <- iSuccess + 1
|
|
returnInterpolations[[iSuccess]] <- matrix(rbind(c(startVMS,endVMS),cbind(fx,fy)),ncol=2,dimnames=list(c("startendVMS",seq(1,res,1)),c("x","y")))
|
|
}
|
|
|
|
#Interpolate according to a straight line
|
|
if(method == "SL" & int == 1){
|
|
fx <- seq(tacsat$SI_LONG[startVMS],tacsat$SI_LONG[endVMS],length.out=res)
|
|
fy <- seq(tacsat$SI_LATI[startVMS],tacsat$SI_LATI[endVMS],length.out=res)
|
|
|
|
#Add one to list of successful interpolations
|
|
iSuccess <- iSuccess + 1
|
|
returnInterpolations[[iSuccess]] <- matrix(rbind(c(startVMS,endVMS),cbind(fx,fy)),ncol=2,dimnames=list(c("startendVMS",seq(1,res,1)),c("x","y")))
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return(returnInterpolations)}
|
|
|
|
|
|
cat("Loading Table\n")
|
|
tacsatX <-read.table(inputFile,sep=",",header=T)
|
|
cat("Adjusting Columns Types\n")
|
|
tacsatX<-transform(tacsatX, VE_COU= as.character(VE_COU), VE_REF= as.character(VE_REF), SI_LATI= as.numeric(SI_LATI), SI_LONG= as.numeric(SI_LONG), SI_DATE= as.character(SI_DATE),SI_TIME= as.character(SI_TIME),SI_SP= as.numeric(SI_SP),SI_HE= as.numeric(SI_HE))
|
|
tacsatX$SI_DATIM=NULL
|
|
cat("Sorting dataset\n")
|
|
tacsatS <- sortTacsat(tacsatX)
|
|
tacsatCut<-tacsatS
|
|
tacsatCut <- tacsatS[1:1000,]
|
|
|
|
cat("Interpolating\n")
|
|
interpolation <- interpolateTacsat(tacsatCut,interval=interval,margin=margin,res=res, method=method,params=list(fm=fm,distscale=distscale,sigline=sigline,st=st),headingAdjustment=headingAdjustment,fast=fast)
|
|
cat("Reconstructing Dataset\n")
|
|
tacsatInt <- interpolation2Tacsat(interpolation=interpolation,tacsat=tacsatCut,npoints=npoints,equalDist=equalDist)
|
|
tacsatInt <- sortTacsat(tacsatInt)
|
|
cat("Writing output file\n")
|
|
write.csv(tacsatInt, outputFile, row.names=T)
|
|
print(Sys.time())
|
|
cat("All Done.\n")
|